Viewing:
Homepage
Showers
Shower & Steam Cabins
Orlando 900 Steam Shower

Orlando 900 Steam Shower

Orlando 900 Steam Shower  > Ocean
Orlando 900 Steam Shower  > Storm
30% Off From £979.99 inc VAT Was £1,399.99

More Information
Specification
Images (1)
Reviews

Orlando 900 Steam Shower
900mm x 900mm x 2210mm

The Orlando is a very popular 900mm steam shower cabin. The Orlando does not fall short of features, and they are all included in the price. With the outer frame housing LED lights and a cluster of LEDs above the control pad, the Orlando is always going to make a stunning statement in any bathroom. The ceiling also has a bright white LED Halo light and this can be controlled independent of the white LEDs pillar lights, so you can choose the lights to suit your mood.

5 Year Warranty avilable on this product

Features included:
Body Jets Hand Shower Ceiling Light Monsoon Rain Shower Ozone Sterilisation FM Radio Steam Remote Control Circulation Fan LED Lighting    

Overhead monsoon rain Shower, 6 Massage body jets, Multi-function hand shower, FM radio with CD/mp3 input, Remote control, 3kw steam generator, Electronic control pad, Thermostatic shower valve, Circulation fan, Toiletries shelf, Low voltage ceiling light, LED lighting, Built in seat, Ozone Sterilization (o3)

Special Notes:
Large steam rooms allow the occupant to sit or stand at a comfortable distance from the steam outlet whilst enjoying the steam facilities. In order to offer the same steam facilities but within a smaller shower cabin footprint the location of the steam outlet pod may be close to the occupant. Care must be taken when using the steam function to avoid scalding. Children should NOT use the steam within the product unless under strict adult supervision.

Installation Notes:
Electrical: This steam shower cabin requires 1 x 13amp electrical supply. It comes with a plug and RCD fitted, however we recommend you remove the plug and have the cabin installed to a fused spur. If you have an RCD fitted within your mains board you may also remove the RCD fitted to the shower flex.

Water: The cabin requires 1 x hot and 1 x cold water supply. The household water pipes should be fed to a point approximately 1 metre off the floor in the corner where the cabin is to be fitted. Balanced water pressure is required, between 1-3 bar. If using a gravity fed system we recommend you use a shower pump, to provide the required water pressures. We do not supply pumps. The steam cabin is a freestanding product and as such we would recommend your fitter does not fit the shower into locations that mean the cabin cannot be moved away from the wall if needed. The couplings on the cabin to connect to your water supply are standard 15mm compression fittings.

0 stars No reviews have been written yet

Share your thoughts with other customers… write your own review